Skip to main content

Maintenance Aerosols

  • Filters
Created by: Paul

New Tech Lubes Brake and Clutch Cleaner is primarily designed to remove oil, grease, brake fluid & other dirt from metal parts restoring optimum working conditions for brake and clutch systems.

Larger size 500ml can is ideal for frequent jobs.

+
Created by: Paul

Citrus Degreaser is specially developed as a tough surface cleaner and degreaser. Containing natural citrus extracts it is pleasant and safe to use leaving a fragrant citrus odour.

+
Created by: Paul

New Tech Lubes Copper Anti Seize is an anti seize paste fortified with Graphite to enable easier dismantling of corroded parts where normal Copper Paste would fail. Copper Anti Seize is designed for use on assemblies that are prone to seizure such as moist environments prone to corrosion.

+
Created by: Paul

Ultra EP additives, New Tech Lubes Cutting & Tapping Fluid is designed to reduce friction, increase metal removal speeds and extend the life of the tools’ cutting edge, all to give an improved surface finish and accuracy.

+
Created by: Paul

When we think of lubricants we tend to think of oil and grease. Dry PTFE film is different as it is applied as a fluid and dries to a solid lubricant finish. This even coating of PTFE powder particles allows components to slide against each other freely, greatly reducing friction and making parts glide against each other.

Larger size 500ml can is ideal for frequent jobs.

+
Created by: Paul

HIGH LOAD GREASE WITH MoS2 & GRAPHITE

Open Gear and Rope Spray is tenacious grease for application where good adhesion and protection from high loads and corrosion is of prime importance. Ideally suited for slew gears and fifth wheels. Delivered from the aerosol as a thin fluid allowing even coverage before setting to a heavy duty grease.

+
Created by: Paul

Fast acting penetrating and de-watering lubricant for the effective release of all corroded components.

Its modern formulation enables the cleaning and lubrication of all metal parts in seconds and provides long-term protection against further contamination and corrosion. The inclusion of fully dispersed, fine particle size PTFE also gives Pen Tech excellent lubrication qualities, even after the fluid film has disappeared.

+
Created by: Paul

Silicone Oil can be used on a variety of materials to prevent squeaks and seizing. Suitable for use a mould release agent to aid in the release of components and to give a smooth finish. Its water-repellent properties can be used to protect surfaces or electrical components and it can also be used safely on a variety of plastics to give a glossy sheen especially on car bumpers, wing mirrors and rubbing strips.

Its light nature means it can be used to lubricate small mechanisms, locks, cables, hinges & various other parts to prevent seizure and squeaks.

+
Created by: Paul

White Maintenance Grease is a, high performance, Calcium soap based grease developed to withstand high surface loads.

+
Created by: Paul

Hi Tack Chain Oil is a general purpose lubricating oil containing effective anti fling agents and a combination of EP additives.

+
Created by: Paul

Dry Graf is a bonded graphite lubricant coating system, giving a dry film coating without baking. The coating eliminates problems associated with oil and grease lubrication where dirt and debris sticking to bearing surfaces is a problem.

+
Category: Food Safe
Created by: Paul

FS-Degreaser is an all-purpose cleaner designed for food production areas.

Its solvent base allows surfaces to be left clean, dry and residue free after use. High pressure aerosol application allows grease and grime to be blasted clear from components and parts leaving them free moving or ready for relubrication.

+